5
click!
11
22
33
44
55
Using the Harness
1. Put the two buckle latches together (Figure 1)
2. Put locked latches into the safety buckle, When you hear a "click", it
means that the safety buckle has been completely locked (Figure 2)
Attention! When inserting locked latches into buckle, make sure to
hear a clear "click" noise
3. Check the harness is correctly locked by pulling the shoulder straps
upwards and downwards (Figure 3)
Attention! Shoulder belts should be securely locked with your child,
and the lap straps should be as low as possible.
4. Tighten the adjuster strap, while still keeping your child
comfortable. Loose straps are dangerous, so check the tightness with
every use (Figure 4)
Attention! The max clearance between the shoulder belt and the
child's shoulder is around one finger's width.
5. Press the slide-stopper (adjuster button) under the cloth cover and
at the same time pull the two shoulder belts upward, so that the
shoulder belts can be loosened (Figure 5)
To Next Page
Loading...
