EasyManua.ls Logo

Ickle Bubba Stomp - Folding The Stroller; Adapter;Capsule Attachment; Capsule Adapter Attachment; Capsule Attachment

Ickle Bubba Stomp
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16 17icklebubba.com icklebubba.com
1. Press and hold down the fold button with your index finger.
2. Whilst holding down the fold button, pull both levers towards you and then fold the chassis down.
3. Follow the arrow direction. Be aware of the danger of moving parts, they can
cause injury. Lift and carry the folded chassis safely by the handle.
4. Secure the chassis in place using the folding loc ensuring the storage latch has
engaged automatically, if it has not then apply the latch manually.
Folding The Stroller
1
2
3 4
ADAPTER/CAPSULE ATTATCHMENT
1
2
Capsule Adapter Attachment
1. Insert each adapter into the capsule before attaching to the chassis.
Capsule Attachment
2. Line up the capsule adapters with the chassis and apply even pressure on both sides
until you here a click.
Removing the Capsule
3. Press down firmly the ‘release buttons’ on either side of the capsules -please refer to capsule
instructions for more details..
PLEASE NOTE: the capsule adapters will remain on the chassis after removing the capsule.
Store the adapters safely after use.
“Click”
3
WARNINGS - IMPORTANT! Read carefully and keep for future reference.
Your child’s safety may be affected if you do not follow these instructions.
Only attach the capsules to face you on the chassis. Never leave your child
unattended. Check that the capsule adaptors are correctly engaged before use.
Remove the capsule adapters before using the stroller/pushchair with a seated
child. This capsule does not replace a cot or a bed. Should your child need to
sleep, then it should be placed in a suitable pram body, cot or bed.

Other manuals for Ickle Bubba Stomp

Related product manuals