iClever IC-GK01 - Product Illustration and Setup; Product Illustration; Preparation and Pairing; Touchpad Usage and Functions

V. Product Illustration
VI. Preparation
Numeric
indicator
CapsLock
indicator
i.Power indicator
ii.Low battery indicator
1. Insert 2pcs AAA batteries into the keyboard back compartment and remove
the USB receiver dongle from it.
2. Turn on your computer.
3. Plug the receiver into your computer's USB port.
4. Slide the keyboard's power switch to “ON” position. The power-on indicator
begins to flash in red color for few seconds and then turn off. At this time, your
keyboard and receiver are successfully paired.
Note: If it fails to connect, press ESC + K key to forcibly enter pairing status.
VII. Touchpad Analysis
Numeric indicator: Press Fn + F11 key, it will light up in blue color. Press
them again to turn off the indicator.
Use for Windows system
CapsLock indicator: Press CapsLock key, it will light up in blue color.
Press it again to turn off the indicator.
Power indicator: It will light up in red color for few seconds and then turn off.
Low battery indicator: It will flash in red color to remind you the low power
condition.
Touchpad Function Finger
Movement
Operational Description
Move cursor
Slide with one finger
Power switch
Left mouse key Right mouse key
Click once or double
click
Use one/two finger(s) to tap touchpad once or
twice
Scroll on horizontal
or vertical direction
Slide with two fingers
-03-
-04-
OFF
ON