Icom IC-207H

Me ee ee i la ate 2 SSP es oo er a.
PANEL DESCRIPTION 1
SECONDARY FUNCTION (after (3)
¢ Writes the VFO contents into the memory
channel or call channel. (pgs. 31, 35)
e Advances the memory channel number
when continuously pushed after ie ger
ming is completed. (p. 31)
* Clears a digit before entry. (p. 19)
¢ Cancels the scan, priority watch or DIMF
memory function. (pgs. 39, 45, 48)
:
D-OFF
[A] to [D] transmit DTMF
memories. (p. 48)
e Sets the keypad for numeral input. Turns the subaudible tone encoder, pocket
beep or tone squelch OFF. (pgs. 25, 50, 51)
)
T-OFF
:
(p. 19)
e Decreases the set mode selection order
after entering set mode.
Increases the squelch level. (p. 20)
¢ The [SQL] control on the front panel has prior-
ity when rotated.
Mutes the operating band’s audio. _—(p. 21)
¢ Mute function is released when any operation is
performed.
‘Decreases the squelch level. (p. 20)
¢ The [SQL] control on the front panel has prior-
ity when rotated.
Locks the digit keys on the keypad (including
the A—-D, # and * keys. (p. 16)
! 16KEY LOCK
)
TONE-1
7
After :
Transmit the appropriate
DTMF code. (p. 48)
Decreases the audio output. (p. 20)
¢ The [VOL] control on the front panel has prior-
ity when rotated.
Sends a 1750 Hz tone signal for 0.5 sec.
(p. 25)
=
2
-_
\o)
Zz
uu
0 |