Icom IC-207H Instruction Manual

1 PANEL DESCRIPTION
a Dee ene keypad
Toggles Between opening and ae the | No bial fuflelion:
operating band’s squelch. (p. 21)
Starts and stops scanning. (p. 39) | No secondary function.
Starts and stops priority watch. (p. 45) | Turns the one-touch PTT function ON and
OFF. (p. 23)
a Selects high output power. (p. 22) | No secondary function.
After (Ge) -
(en) Selects mid-high output power. (p. 22) | No secondary function. Transmit the appropriat
DTMF code or push [0] 1
[9], [A] to [D] to transm
the DTMF memory cor
tents when the DTM
memory encoder is act
vated. (p. 4€
= Selects low output power. (p. 22) ee the DTMF memory encoder function
(ex) (p. 47)
G2) Selects —duplex. (p. 25) | Turns the subaudible tone encoder ON.
(p. 25)
{ean} »)
(e:9) Selects +duplex. (p. 25) | Turns the pocket beep function ON. (jp. 50)
(ex)
Selects simplex (p. 25) | Turns the tone squelch function ON. (p. 51)
7oNE2 | Increases the audio output. (p. 20) | While cand pushed, transmits a 1750 Hz
¢ The [VOL] control on the front panel has prior-
ity when rotated.
i=] ¢
@
OF CF | GF 6

Icom IC-207H Specifications

General

Brand	Icom
Model	IC-207H
Category	Transceiver
Language	English