Icom IC-2200H Service Manual

1 - 2
• UT-115 SPECIFICATIONS
M GENERAL
• Usable temperature range : –10˚C to +60˚C; +14˚F to +140˚F
• Power supply requirement : 5.0 V DC
(4.5 V–8.5 V for AMBE IC VCC line)
• AF input level : 1 V
p-p typical
• Modulation output level : 350 mV
p-p typical
• Demodulation input level : 500 mV
p-p typical
• AF output level : 750 mV
p-p typical
• CODEC type : AMBE
• Transfer speed : 4.8 kbps
• Control signal input voltage : 3.0 V–5.0 V for High
0 V for Low
• Control signal output voltage : Open collector for High
0 V for Low
• Current drain (at 5.0 V DC) : 55 mA typical
• Dimentions : 30(W)×38(D) mm;
(projections not included) 1
3
⁄16(W)×1
1
⁄2(D) inch
• Weight : Approx. 6 g;
7
⁄32 oz
(accessoreis not included)
• Connector : AXN430C330
All stated specifications are subject to change without notice or obligation.

Icom IC-2200H Specifications

General

Frequency Range	144-148 MHz
Mode	FM
Antenna Connector	SO-239
Weight	1.2 kg
Power Supply Requirement	13.8 V DC
Dimensions	140 x 40 x 160 mm
Current Consumption	15A (at 65W output)
Number of Channels	207 (200 regular, 6 scan edges, 1 call)