Need help?Do you have a question about the Icom IC-229A and is the answer not in the manual?
General| Brand | Icom |
|---|---|
| Model | IC-229A |
| Category | Transceiver |
| Language | English |
Emphasizes reading the manual and highlights critical safety cautions for transceiver operation.
Warnings about power connection, voltage, placement, and handling to prevent damage and injury.
Instructions for connecting the transceiver to a 12V DC battery or AC power supply, including fuse details.
Details transmitting, including simplex selection, output power, microphone use, and caution.
Covers repeater operation, duplex settings, subaudible tone, DTMF codes, and 1750 Hz tone call.
Describes how priority watch monitors a pre-programmed frequency while operating on VFO.
Explains how priority watch scans memory channels at intervals, with options for skipping channels.
Instructions for writing DTMF codes into memory channels on the HM-56 microphone.
Details erasing DTMF code memory and automatic transmission of programmed DTMF codes.
Covers manual and auto re-dialing of last-transmitted DTMF codes, and writing re-dialing memory.
Instructions for installing optional units (UT-50, UT-51, UT-55) and an overview of selective calling functions.
Details the subaudible tone encoder function and pocket beep operation for selective calls.
Lists common issues like no power, no sound, no contact, and scan problems with their respective solutions.
Covers CPU resetting, cleaning procedures, and fuse replacement guidelines.
To Next Page
