Icom IC-2GXET

Device complies with Part 15 of FCC Rules for operation.

Explains manual conventions and model distinctions for clarity.

Critical warnings for safe operation, equipment care, and environmental considerations.

Lists items included in the transceiver package upon unboxing.

Diagrams of the transceiver's panel layout and external connection points.

Detailed explanations of switches, indicators, and the function display.

Details the function of the keyboard keys for 'T' type models.

Instructions for charging, handling, and optimizing battery pack life.

Details on connecting for charging and alternative charging methods.

Instructions for attaching antenna, belt clip, and handstrap.

Explains VFO, Memory, Call Channel modes and using the tuning dial.

Configuration for tuning steps, dial select, display lighting, and lock function.

Methods for setting frequencies using digit keys or arrow keys on 'T' type models.

Steps for receiving, monitoring, transmitting, and understanding simplex/duplex.

Selecting output power levels and activating the PTT lock function.

Steps to access repeaters, including offset, direction, and subaudible tones.

Configuration for auto repeater function and offset frequency.

Selecting subaudible tone frequencies and using the tone scan function.

How to program, transmit DTMF codes, and adjust transmission speed.

Steps to recall a stored call channel and program new frequencies/settings.

How to select, program, and use dial select for memory channels.

How to transfer contents from a memory channel to the VFO.

Overview of programmed and memory scan types, initiation, and cancellation.

Configuring scan resume conditions and setting skip channels.

Details pager function availability and how it's used for personal/group calls.

Information on code channels, assignment, and programming for pager/squelch.

Steps for operating the pager to call specific stations and wait for calls.

Using code squelch for silent standby, receiving calls from known IDs.

Details on pocket beep operation and tone squelch for group calls.

Configuration for power saver duty cycle and display lighting timer.

Settings for beep tones and adjusting DTMF transmission speed.

How to restrict channel access and display only channel numbers.

Instructions for installing optional UT-86 TONE SQUELCH or UT-49 DTMF DECODER units.

Chart summarizing navigation between modes and available SET mode functions.

Lists common problems, their causes, solutions, and reference pages.

Instructions for partial and total resetting of transceiver settings.

Details general specs (weight, frequency) and transmitter specs (power, deviation).

Details receiver specs (sensitivity, selectivity) and audio output.

Details available battery packs, chargers, and their specifications.

Information on speaker-microphones, headsets, mounting brackets, and optional units.