7
3
BATTERY CHARGING
3
DD
Rapid charging with the BC-119N+AD-105
q Insert the optional AD-105
DESKTOP CHARGER ADAPTER
into the
charging slot of the BC-119N.
w Insert the battery pack, either by itself or attached to the trans-
ceiver, into the charger.
IC-4088SR
BP-202
AD-105
BC-119N
AC adapter
NOT used:
Fix the 3-pin connector to the bottom of the charger with the
adhesive tape, etc., to prevent catching or touching the 3-pin
connector’s terminals with the adapter’s leads, etc.
*
*NOTE: Put the Ni-Cd battery
adapter into the AD-105 rear
slot when the BP-202 is
attached to the transceiver.
Turn the power OFF!
When the installed Ni-Cd
battery is nearly exhausted
and the function display
blinks in intermittently,
push [PWR] until the trans-
ceiver’s power goes OFF.
To Next Page
Loading...
