EasyManua.ls Logo

Icom IC-4088SR - Specifications

Icom IC-4088SR
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
10
SPECIFICATIONS
GENERAL
• Frequency coverage : 446.00625–446.09375 MHz
• No. of operating Ch. : 8 (simplex)
• Mode : 8K50F3E (FM)
• Frequency stability : ±5.6 ppm; ±2.5 kHz
• Frequency resolution : 12.5 kHz
• Power supply requirement : 3 AA (R6) alkaline, BP-202, BC-149D
(negative ground) or CP-18E
• Current drain : Less than 500 mA
• Operating temp. range : –20˚C to +55˚C
• No. of CTCSS freq. : 38
• Dimensions : 52.5(W)×102.5(H)×26.9(D) mm
(projections not included)
• Weight (approx.) : 200 g
(including 3×AA (R6) batteries)
TRANSMITTER
• Output power : Less than 500 mW ERP
• Maximum deviation : ±2.5 kHz
• Spurious emissions : Less than 0.25 µW
• Ext. mic. connector : 3-conductor 2.5 (d) mm/2.2 kΩ
RECEIVER
• Receiver system : Double-conversion superheterodyne
• Sensitivity (20 dB SINAD) : Less than 26.5 dBµV/m
• Selectivity : More than 8.5 kHz/–6dB
•
Spurious & image rejection
: Better than 91.29 dBµV/m
• Adjacent Ch. rejection : Better than 81.29 dBµV/m
• Intermodulation rejection : Better than 86.29 dBµV/m
• Audio output power : More than 100 mW at 10 % distortion
(at 4.5 V DC) with an 8 Ω load
• Ext. speaker connector : 3-conductor 3.5 (d) mm/8 Ω
All stated specifications are subject to change without notice or obligation.
IC-4088SR.qxd 03.9.2 20:45 Page 22 (1,1)