17
9
9
OTHER FUNCTIONS
D Beep tones ON/OFF
Confirmation beep tones normally sound
when a key is pushed. These can be turned
ON or OFF.
ON (on) : Emits confirmation beep.
OFF (oF) : No confirmation beep.
DD
Scan resume type
Select the scan resume type from timer scan
and pause scan.
Timer scan (tS) : Scan resumes after the
specified time period even
signal is received.
Pause scan (PS): Scan pauses until the sig-
nal disappears.
DD
Time-out timer
The time-out timer limits continuous trans-
mission time period to prevent accidental
prolonged transmission, such as when using
the PTT hold function.
The time period can be specified within
1–30 min. in 1 min. steps.
DD
Auto power OFF timer
When signal is received, or no opera-
tion is performed for the set period, the
transceiver turns power OFF automat-
ically.
30 min., 1 and 2 hours timers are
available.
To Next Page
Loading...
