Icom IC-706 User Manual

1. Position base unit adapter as it shown on a picture below. Pogo pins must be positioned
strictly to half holes on the edge of the base unit adapter!
2. Push the base unit adapter and fix it with a thumb screw:
3.

Icom IC-706 Specifications

General

Antenna Impedance	50 ohms
Supply Voltage	13.8 V DC ±15%
Modes	SSB, CW, AM, FM
Current Drain Transmit	20 A (max)
Sensitivity SSB/CW	0.16 μV (10 dB S/N)
Sensitivity AM	2.0 μV (10 dB S/N)
Selectivity SSB	2.2 kHz/-6 dB, 4.5 kHz/-60 dB
Selectivity CW	500 Hz/-6 dB
Selectivity AM	6 kHz/-6 dB
Selectivity FM	30 kHz/-60 dB