Need help?Do you have a question about the Icom IC-729 and is the answer not in the manual?
General| Mode | SSB, CW, AM |
|---|---|
| Weight | 5.5 kg |
| Voltage | 13.8 V DC |
| IF Rejection | More than 70 dB |
| Type | HF Transceiver |
| Power Output | 10-100W (SSB/CW), 10-40W (AM) |
| Receiver Sensitivity | 0.16 μV (10 dB S/N) |
| Current Drain | 20 A (max) |
| Image Rejection | 70 dB |
| Spurious Rejection | 70 dB |
Details the reception signal path, including filters, mixers, IF stages, and noise blanker.
Describes the signal path from microphone input to RF output, including keying and modulation.
Explains the Phase-Locked Loop system for frequency synthesis and control.
Lists required test equipment and connection diagrams for servicing the transceiver.
Guides through adjusting DDS clock, reference frequency, lock voltages, and output levels.
Details adjustments for BFO frequency, PBT, sensitivity, and IF trap.
Covers adjustments for idling current, SWR detection, transmit gain, and output power.
To Next Page
