Icom IC-7800 - Page 18

DD
Command table (continued)
14-8
14
CONTROL COMMAND
Command Sub command Description
1A 050190 Set/read FFT scope averaging set
for RTTY decoder (0=OFF, 1=2,
2=3, 3=4)
050191 Set/read FFT scope waveform
color set for RTTY decoder
(see p. 14-10 for details)
050192 Set/read FFT scope averaging set
for PSK decoder (0=OFF, 1=2,
2=3, 3=4)
050193 Set/read FFT scope waveform
color set for PSK decoder
(see p. 14-10 for details)
050194 Set/read PSK AFC function tuning
range (0=±8 Hz, 1=±15 Hz)
06 Send/read DATA mode with filter
set (see p. 14-10 for detail)
07 Send/read SSB transmit band-
width (0=WIDE, 1=MID, 2=NAR)
08 Send/read DSP filter shape
(0= sharp, 1= soft)
09 Send/read roofing filter set
(0=6 kHz, 1=15 kHz)
0A Send/read manual notch width
(0=Wide, 1=Mid., 2=Nar.)
10 Send/read lock function set
(0=OFF, 1=ON)
1B 00 Set/read repeater tone frequency
(see p. 14-10 for details)
01 Set/read TSQL tone frequency
(see p. 14-10 for details)
1C 00 Set/read the transceiver’s condi-
tion (0=Rx; 1=Tx)
01 Set/read antenna tuner condition
(0=OFF, 1=ON, 2=Start tuning or
while tuning)