Icom IC-F1700 User Manual

3
2
MDC 1200 OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
DD
Transmitting a CallAlert
CallAlert allows you to notify another user who may be away
from the transceiver that you want to talk.
q Push [MDC Call] to enter the MDC menu selection mode.
• Or push [MDC CallAlert] to enter the transceiver alias selection
mode. In this case, skip steps w and e.
w Select “CALALERT” using [CH Up], [CH Down], [MDC
Up] or [MDC Down].
For IC-F1700 series For IC-F70 series
e Push [MDC Call] again to enter the transceiver alias selec-
tion mode.
r Select the desired alias using [CH Up], [CH Down], [MDC
Up] or [MDC Down].
t Push [PTT] to transmit the CallAlert to the selected station.
• “CA CALL” is displayed.
y Release [PTT].
• “CA OK” is displayed if the targeted station received the alert.
• “CA FAIL” is displayed if the targeted station does not send an
acknowledgement.
u After a specified time period has passed, the transceiver
will return to receive.
DD
Transmitting a Stun Call
Stun call allows you to send MDC 1200 signal that will stun
the targeted station.
q Push [MDC Call] to enter the MDC menu selection mode.
w Select “STUN” using [CH Up], [CH Down], [MDC Up] or
[MDC Down].
For IC-F1700 series For IC-F70 series
e Push [MDC Call] again to enter the transceiver alias selec-
tion mode.
r Select the desired alias using [CH Up], [CH Down], [MDC
Up] or [MDC Down].
t Push [PTT] to transmit the stun call to the selected station.
• “STN TX” is displayed.
y Release [PTT].
• “STN ACK” is displayed if the targeted station is turned ON, on
channel and within range.
• “STN FAIL” is displayed if the targeted station does not send an
acknowledgement.
u After a specified time period has passed, the transceiver
will return to receive.
STUN
CALALERT

Icom IC-F1700 Specifications

General

Brand	Icom
Model	IC-F1700
Category	Transceiver
Language	English