4
2
MDC 1200 OPERATION
DD
Transmitting a Revive Call
Revive call allows you to send MDC 1200 signals that will
revive the targeted (stunned) station.
q Push [MDC Call] to enter the MDC menu selection mode.
w Select “REVIVE” using [CH Up], [CH Down], [MDC Up]
or [MDC Down].
For IC-F1700 series For IC-F70 series
e Push [MDC Call] again to enter the transceiver alias selec-
tion mode.
r Select the desired alias using [CH Up], [CH Down], [MDC
Up] or [MDC Down].
t Push [PTT] to transmit the revive call to the selected sta-
tion.
• “REV TX” is displayed.
y Release [PTT].
• “REV ACK” is displayed if the targeted station is turned ON, on
channel and within range.
• “REV FAIL” is displayed if the targeted station does not send an
acknowledgement.
u After a specified time period has passed, the transceiver
will return to receive.
DD
Transmitting a Radio Check Call
Radio check call allows you to determine whether another
transceiver is turned on, within range and on channel without
requiring any action from the targeted station user.
q Push [MDC Call] to enter the MDC menu selection mode.
w Select “RADIOCHK” using [CH Up], [CH Down], [MDC
Up] or [MDC Down].
For IC-F1700 series For IC-F70 series
e Push [MDC Call] again to enter the transceiver alias selec-
tion mode.
r Select the desired alias using [CH Up], [CH Down], [MDC
Up] or [MDC Down].
t Push [PTT] to transmit the radio check call to the selected
station.
• “RDO CHK” is displayed.
y Release [PTT].
• “CHK ACK” is displayed if the targeted station is turned ON, on
channel and within range.
• “CHK FAIL” is displayed if the targeted station does not send an
acknowledgement.
u After a specified time period has passed, the transceiver
will return to receive.
To Next Page
Loading...
Need help?
General
