Need help?Do you have a question about the Icom IC-F1000T and is the answer not in the manual?
General| Frequency Range | 136-174 MHz |
|---|---|
| Number of Channels | 16 |
| Channel Spacing | 12.5/25 kHz |
| Power Output | 5W |
| Dimensions | 52.5 (W) × 111.5 (H) × 24.5 (D) mm |
| Weight | 140 g (with BP-279) |
| Waterproof Rating | IP67 |
| Mode | FM |
| Voltage | 7.4 V |
Emphasizes the importance of reading all instructions before using the transceiver for safe operation.
Instructs users to keep the guide for future reference on transceiver operation and features.
Details the physical layout and main controls of the transceiver's exterior, including selectors, buttons, jacks, and antenna connector.
Explains the Function Display icons and the LED Indicator meanings for operational status and information.
Details the assignment and usage of programmable keys for channel selection, scanning, and priority functions.
Covers advanced features like Lock, Lone Worker, Surveillance, Siren, Scrambler, and Compander.
Explains Tone, Talk Around, DTMF, Call, Emergency, and entering modes like User Set.
Instructions for selecting channels and performing basic receiving and transmitting operations.
Details on transmit inhibit, timers, and receiving special calls like Stun/Kill.
Guide to initiating and managing emergency calls, including auto TX/RX functions.
Explains Lone Worker, Man Down, and Motion Detection emergency call features.
Guide to customizing transceiver settings via User Set Mode, including Backlight, Beep, Ringer, Mic Gain, and Squelch.
Introduces the MDC 1200 signaling system and its capabilities like PTT ID and Emergency calls.
Details how to receive PTT ID, Emergency, and Stun/Revive calls within the MDC 1200 system.
Instructions for transmitting PTT ID and Emergency signals using the MDC 1200 system.
To Next Page
