PANEL DESCRIPTION
PRIORITY A CHANNEL, PRIORITY B CHANNEL
Push to select the Priority A or Priority B channel. ➥
PRIORITY A CHANNEL (REWRITE),
PRIORITY B CHANNEL (REWRITE)
Push to select the Priority A or Priority B channel. ➥
Hold down ➥ [Prio A (Rewrite)] or [Prio B (Rewrite)] to as-
sign the operating channel to Priority A or Priority B chan-
nel, respectively.
MEMORY CHANNELS 1, 2, 3, 4
Push to directly select memory channel 1, 2, 3 or 4, if pro- ➥
grammed.
MONI // only for the LMR mode //
Hold down to cancel the CTCSS (DTCS) or 2-Tone mute. ➥
The transceiver enters “Audible” mode.
Push to turn OFF the function. ➥
MONI (Audi) // only for the PMR mode //
Hold down to cancel the CTCSS (DTCS) or 5-Tone mute. ➥
The transceiver enters “Audible” mode.
Push or hold down to activate one or two functions if pro- ➥
grammed.
LOCK
< for the Non-display type transceivers >
Hold down this key to lock all programmable keys except ➥
the followings:
[Moni], [Lock], [Emer], [Surveillance], [Siren], [Lone
Worker], and [Shift].
< for the Simple type and 10-key type transceivers >
Hold down until “LOCK ON” is displayed to lock all pro- ➥
grammable keys except the followings:
[ M o n i ] , [Lock], [Emer], [Surveillance], [Siren], [Lone
Worker], and [Shift].
To turn OFF the Key Lock function, hold down until “LOCK ➥
OFF” is displayed.
LONE WORKER
< for the Non-display type transceivers >
Hold down to turn ON the Lone Worker Function. ➥
Push to turn OFF the Function. ➥
< for the Simple type and 10-key type transceivers >
Push to turn the Lone Worker Function ON or OFF. ➥
• If no operation occurs for a set time period, the trans-
ceiver automatically enters the emergency mode.
HIGH/LOW
Push to select the transmit output power temporarily or ➥
permanently, depending on the presetting.
To Next Page
Loading...
Need help?
General
