Basic Setup of Cloning Software
28
Programming information
•
We recommend that you should read out all the transceiver’s data before start entering/editing parameters even if
the transceiver is factory fresh. This avoids rare glitches which might cause programming errors when writing back the
altered parameters.
•CS-F3060 has 5 model types. You can select the desired model type which you are going to clone. LMR (2Tone), LMR
(LTR™), LMR (Digital), PMR (5Tone/DTMF) or BIIS PMR is available. The
Tree View screen content will be changed when
the model type is switched.
•
Double-click the desired cell in the contents list screen directory, or
right-click the cell then click [Edit... Enter] to
select and change the setting depends on the item.
•Click [Help] to display the help screen for the item.
✔
LMR (2Tone)
LMR (LTR)
LMR (Digital)
PMR (5Tone/DTMF)
BIIS PMR
✔
LMR (2Tone)
LMR (LTR)
LMR (Digital)
PMR (5Tone/DTMF)
BIIS PMR
Frequency RX
Enter specified receive frequency in RX box.
VHF (IC-F3060 series)
: 136 to 174 MHz
UHF (IC-F4060 series)
: 400 to 470 MHz,
450 to 512/520 MHz (depending on version)
Frequency RX
Enter specified receive frequency in RX box.
VHF (IC-F3060 series)
: 136 to 174 MHz
UHF (IC-F4060 series)
: 400 to 470 MHz,
450 to 512/520 MHz (depending on version)
Edit menu
Help screen
•
Select the model type which you are going to clone from; LMR (2Tone), LMR (LTR™), LMR (Digital), PMR (5Tone/
DTMF) and BIIS PMR.
LMR
: Land Mobile Radio. 2-Tone, LTR™
and Digital functions are available.
PMR
: Private Mobile Radio. 5-Tone and DTMF function is available.
BIIS PMR
: Binary Interchange of Information and Signalling. MSK and 5-Tone functions are available.
&NOTE:
The model type must be selected at first, otherwise the edited contents will be lost.
BIIS PMRPMR LMR (Digital)LMR (LTR™) LMR
To Next Page
Loading...
Need help?
General
