Icom IC-F5062

17
3
CONNECTION AND MAINTENANCE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■ Antenna
A key element in the performance of any communication sys-
tems is an antenna. Contact your dealer about antennas and
the best places to mount them.
■ Fuse replacement
A fuse is installed in the fuse holder of the supplied DC power
cable. If a fuse blows or the transceiver stops functioning,
track down the source of the problem if possible, and replace
the damaged fuse with a new rated one.
❑ Fuse rating: 10 A
USE the 10 A fuse only.
■ Cleaning
If the transceiver becomes dusty or dirty, wipe it clean with a
soft and dry cloth.
DO NOT use solvents such as benzene or alcohol,
as they may damage the transceiver surfaces.