Icom IC-F5063 - Scrambler Function; Emergency Transmission; Stun Function; Priority a Channel Selection

13
2
BASIC OPERATION
■ Scrambler function
The voice scrambler function provides private communica-
tion between stations. All versions have a built-in frequency
inversiontypescrambler;however,anoptionalrollingornon-
rolling type is available as well.
q Push [Scrambler] to turn the scrambler function ON.
 •“ ” (Scrambler indicator) appears.
w Push [Scrambler] again to turn the scrambler function
OFF.
 •“ ” disappears.
■ Emergency transmission
When[Emergency]ispushedforthespeciedtimeperiod,
an emergency signal is automatically transmitted. (p. 6)
When[Emergency]ispushedforthespeciedtimeperiod,
the DTMF or 5-tone* emergency signal is transmitted once
or repeatedly on the emergency channel. However, when no
emergency channel is specified, the signal is transmitted on
the previously selected channel.
If you want to cancel the emergency call, push and hold the
key again before transmitting the call.
* Depending on the operating model type.
■ Stun function
WhenthespeciedID,setasakillID,isreceived,thestun
function is activated.
WhenthekillIDisreceived,thetransceiverswitchestothe
password required condition. Entering of the password (p. 8)
is necessary to operate the transceiver again in this case.
■ Priority A channel selection
Whenoneofthefollowingoperationsisperformed,thetrans-
ceiver selects the Priority A channel automatically.
•TurningthepowerON
The Priority A channel is selected each time the transceiver
power is turned ON.
•Statuscall
The Priority A channel is selected when transmitting a sta-
tus call. (BIIS operation only)
•Offhook.
The Priority A channel is selected when the microhone is
took off from its hanger.