Need help?Do you have a question about the Icom IC-F5123D and is the answer not in the manual?
General| Type | Mobile |
|---|---|
| Frequency Range | 136-174 MHz |
| Number of Channels | 128 |
| Power Output | 50W |
| Output Power | 50W |
| Modulation | FM |
| Dimensions | 160 x 40 x 160 mm |
| Weight | 1.4 kg |
| Channel Capacity | 128 |
| Power Supply | 13.6 V DC |
| Operating Voltage | 13.6 V DC |
| Channel Spacing | 12.5/25 kHz |
| Operating Temperature Range | –30°C to +60°C |
Covers essential precautions to prevent damage or hazards when using the transceiver.
Provides critical notes and procedures for safe and effective repair work.
Covers frequency range, channels, power, dimensions, weight, and environmental ratings.
Details output power, modulation characteristics, frequency stability, and emissions.
Details sensitivity, squelch, selectivity, and audio output characteristics.
Lists required equipment and setup for calibration procedures.
Guides on calibrating PLL lock voltage and reference frequency.
Covers TX power, modulation balance, and FM/digital deviation calibration.
Details calibration for RX sensitivity, S-meter, and squelch levels.
To Next Page
