21
2
IDAS OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Push [Digital Button] again to enter the destination ID se- t
lection mode.
• The preprogrammed ID name is displayed.
•
When the ID name is not programmed, the ID code is displayed.
• The primary ID can be preset to display first.
Push [CH Up] or [CH Down] to select the desired ID name y
(or ID code).
For the IC-F3230D/F4230D series transceiver
For the IC-F5220D/F6220D series transceiver
Push [PTT] to transmit the status message to the selected u
station or talkgroup.
• “STAT TX” is displayed.
Release [PTT]. i
• “STAT OK” is displayed after receiving an acknowledgement
from the targeted station.
• “STA FAIL” is displayed if there is no acknowledgment from the
targeted station.
o After a specified time period has passed, the transceiver
will return to receive.
To Next Page
Loading...
Need help?
General
