34
4
APCO P25 MODE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D Receiving
q When a Talkgroup call is received;
• The LED indicator
(for Handhelds) or Busy indicator (for Mobiles)
lights green.
• Ringers sound.
• The Talkgroup ID (or name) and calling station ID (or name) are
displayed for 2 seconds (Simple and 10-key types only)
When All Call is received, “ALL CALL” is displayed instead of
the Talkgroup ID (or name). (S
imple and 10-key types only
)
• Depending on the presetting, the transceiver does not open the
squelch, and communication is not established, if the Talkgroup
ID or NAC (Network Access Code) is not matched.
For Handhelds: For Mobiles:
TG:1
INDIVIDUAL1
TG:1
INDIVIDUAL1
INDV TGID SET
The talkgroup ID
The calling station name (or ID)
w Hold down [PTT] and speak into the microphone.
NOTE: Only one station is permitted to speak at a time.
e Release [PTT] to receive a response.
NOTE: When the Talkgroup ID is set to ‘65535,’ any Talk-
group call can be received (if NAC is matched).
D Talkgroup display on mode change
The Talkgroup ID (or name) is displayed for 2 seconds on the
upper line of the LCD when the operating channel or zone is
changed.
This function can be turned OFF only by a dealer.
D Talkgroup display on PTT
The Talkgroup ID (or name) is displayed for 2 seconds on the
upper line of the LCD when [PTT] is pushed.
This function can be turned OFF only by a dealer.
To Next Page
Loading...
Need help?
General
