Icom IC-M410BB - Page 15

2
1
2
2
PANEL DESCRIPTION
■ Command microphone
1PTT SWITCH [PTT] (p. 13)
Hold down to transmit, release to receive.
2SOFTWARE KEYS (p. 5)
 Scrollthekeyfunctionspushing[◄]or
[►],thenpusheitherofthe4software
keys to select the function displayed at
the bottom of the display.
3MENU KEY [MENU] (p. 73)
Push to display or close the Menu screen.
4UP/DOWN KEYS [▲ CH]/[▼ CH]
• Push to select an operating channel,
Menu items, Menu settings, and so on.
(p. 9)
• Push to select a character or number in
the entry mode.
(p. 12)
5LEFT/RIGHT KEYS [◄]/[►]
• Push to scroll the Software Key functions.
(p. 5)
• Push to select a character or number in
the entry mode.
(p. 12)
6ENTER KEY [ENT]
Push to set the entered data, selected
item, and so on.
7CHANNEL 16/CALL CHANNEL KEY [16/C]
• Push to select Channel 16. (p. 9)
• Hold down for 1 second to select the
Call channel. (p. 12)
8CLEAR KEY [CLEAR]
Push to cancel the entered data or to
return to the previous screen.
9 VOLUME/SQUELCH/POWER DIAL
[VOL]/[SQL]/[PWR]/[DIAL] (p. 11)
• Rotate to adjust the volume level,
squelch level
• Hold down for 1.5 seconds to turn the
transceiver ON or OFF.
• Push to set the entered data, selected
item, and so on.
DISTRESS KEY [DISTRESS]
Hold down for 3 seconds to transmit a
Distress call. (p. 19)

Function
display
Speaker
Microphone
9
8
5
7
4
2
1
3
4
5
6
Front panel: Rear panel:
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com