• SCRAMBLER KEY
➥ Push and hold to turn the voice scrambler func-
tion ON.
➥ Push this key to turn the voice scrambler func-
tion OFF.
NOTE:
• The optional UT-109 (#02) or UT-110 (#02)
voice scrambler unit is required.
- UT-109 : Non-rolling type.
32 codes are available.
- UT-110 : Rolling type. Provides higher com
-
munication security.
1020 (4 groups
× 255) codes are
available.
• This transceiver requires version #02 of these
units. Do not install version #01, as they are
not compatible.
• Some PC board modifications are required
when installing UT-109 or UT-110. Please refer
to ‘Optional UT-109 or UT-110 installation’.
(p. 14)
• Please contact your dealer for details.
• USER SET MODE KEY
Changes the contents of the items in the User Set
mode. Please refer to p. 10.
• Push and hold this key for 1 sec. to enter set mode.
Push this key again momentarily to select the desired
item. Push [ ]/[ ] to set the desired level/condition.
Push and hold this key again to exit set mode.
• User set mode also available via the ‘Power ON func-
tion’.
6
1
PANEL DESCRIPTION
To Next Page
Loading...
Need help?
General
