26
5
OTHER FUNCTIONS
New2001 New2001
■ Waypoint
D Display a waypoint list
Up to 100 waypoints can be stored in the waypoint list.
q Push [MENU] to enter the Menu mode.
w Push [∫] or [√] to select “Waypoint,” then push [ENT].
e Push [∫] or [√] to select “List,” then push [ENT].
r Push [∫] or [√] to select the desired waypoint.
• Push [Ω] to sort the waypoint data by Name.
• Push [≈] to sort the waypoint data by Range.
t Push [ENT] to display the detail screen of the selected
waypoint.
y Push [CLEAR] to return to the previous screen.
u Push [CLEAR] three times to exit the Menu mode.
D Add a waypoint
The position information that you want to memorize can be
added as a waypoint.
q Push [MENU] to enter the Menu mode.
w Push [∫] or [√] to select “Waypoint,” then push [ENT].
e Push [∫] or [√] to select “Add,” then push [ENT].
• Your current position information is displayed.
r Push [∫] or [√] to select “Name,” then push [ENT].
t Push [∫], [√], [Ω] or [≈] to select the desired character in
the table, then push [ENT] to input it.
• Select “ ,” then push [ENT] to move the cursor forward.
• Select “ ,” then push [ENT] to move the cursor backward.
• Select “SPACE,” then push [ENT] to input a space.
• Select “DELETE,” then push [ENT] to delete a character.
• Push [CLEAR] to cancel and return to the previous screen.
[CLEAR]
[ENT]
[∫], [√],
[Ω], [≈]
y Repeat step t to input a waypoint name of up to 10 char-
acters.
u Push [∫], [√], [Ω] or [≈] to select “FINISH,” then push
[ENT] to set and return to the previous screen.
To Next Page
