To Next PageTo Next PageWhat to do if the console does not display correct feedback on ICON Health & Fitness Exercise Bike?
If the console on your ICON Health & Fitness Exercise Bike isn't displaying the correct feedback, you should adjust the reed switch.
How to fix console that does not turn on ICON Health & Fitness Exercise Bike?
If the console of your ICON Health & Fitness Exercise Bike does not turn on, ensure that the power cord is fully plugged in and that the power switch is in the reset position.
What to do if pedals slip on ICON Health & Fitness NordicTrack S10i STUDIO CYCLE Exercise Bike?
If the pedals slip while pedaling, even at the highest resistance setting on your ICON Health & Fitness Exercise Bike, you should adjust the drive belt.
How to fix loose left crank arm on ICON Health & Fitness Exercise Bike?
If the left crank arm feels loose while pedaling your ICON Health & Fitness Exercise Bike, tighten the two M6 x 25mm Screws (96).
General| Brand | ICON Health & Fitness |
|---|---|
| Model | NordicTrack S10i STUDIO CYCLE |
| Category | Exercise Bike |
| Language | English |
Identifies critical safety decals and their locations on the studio cycle machine.
Lists crucial precautions for safe and proper use of the studio cycle.
Outlines preventive maintenance service plan options and features.
Details standard service plan options and coverage.
Introduces the NORDICTRACK COMMERCIAL S10I STUDIO CYCLE and its features.
Illustrates and identifies small parts required for product assembly.
Lists tools, personnel, and registration steps for assembly.
Instructions for attaching the front stabilizer and leg covers to the base.
Steps for attaching the rear stabilizer and installing the handlebar post.
Instructions for attaching the handlebar and console support.
Steps for connecting console wires and attaching the console.
Instructions for securing the console and installing the saddle post.
Steps for attaching the saddle and pedals to the studio cycle.
Instructions for placing hand weights and performing a final inspection.
Detailed instructions for safely plugging in the studio cycle's power cord.
Explains wattage, incline system, and console features.
Guides on adjusting saddle angle, position, and carriage.
Instructions for adjusting saddle, handlebar, and console positions.
Procedures for leveling the cycle, using pedals, and operating the brake knob.
Illustrates the console layout and details its advanced features.
Steps for powering on the console and interacting with the touch screen.
Guide for connecting to Wi-Fi, setting up iFit, and customizing console settings.
Procedures for updating console firmware and calibrating the incline system.
Instructions for using manual mode, adjusting resistance/incline, and monitoring progress.
Details on pausing, ending workouts, using heart rate monitors, and fan control.
Steps for selecting and starting map or onboard workouts.
Managing workout progress, manual overrides, and final steps.
Instructions for creating, saving, and starting custom map workouts.
Guide for adding, selecting, and starting iFit workouts.
How to access, change, and manage console settings and information.
Steps to connect the console to a wireless network for iFit.
Procedure to calibrate the studio cycle's incline system.
How to use the sound system and connect via HDMI.
Information on using an optional chest heart rate monitor.
Details FCC compliance, cautions, and exposure requirements.
Guidelines for cleaning, maintenance, and troubleshooting console problems.
Troubleshooting steps for incline system and loose crank arm.
Procedure to adjust the reed switch for accurate console feedback.
Steps to adjust the drive belt if pedals are slipping.
Guidance on exercise intensity, heart rate measurement, and workout strategies.
Demonstrates and describes five common stretches for flexibility.
Lists product components with key numbers and quantities.
Continues the list of product components with key numbers and quantities.
Visual representation of part assembly for the studio cycle.
Visual representation of part assembly for the studio cycle.
Information on how to order replacement parts for the product.
Details the product's limited warranty terms and conditions.
