EasyManuals Logo

ICON Legend Series User Manual

ICON Legend Series
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
ENGLISH
Introduction
Please write your serial number here for future reference:
Purchased at:
Date of purchase:
Thank you for purchasing the ICON Legend series Apollo/Artemis studio large-diaphragm
condenser microphone. We sincerely trust this product will provide years of satisfactory
service, but if anything is not to your complete satisfaction, we will endeavor to make
things right.
In these pages, you'll find a detailed description of the features of the Apollo/Artemis,
step-by-step instructions for its setup and use, and full specifications.
You'll also find a warranty card enclosed---please don't forget to fill it out and mail it so
that you can receive online technical support at: www.icon-global.com. And so we can
send you updated information about these and other ICON products in the future. As
with most electronic devices, we strongly recommend you retain the original packaging.
In the unlikely event the product must be returned for servicing, the original packaging
(or reasonable equivalent) is required.
With proper care , your Apollo/Artemis will operate without any trouble for many years.
We recommend that you record your serial number in the space provided below for
future reference.
1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ICON Legend Series and is the answer not in the manual?

ICON Legend Series Specifications

General IconGeneral
Polar PatternCardioid
ColorBlack
TypeCondenser
Frequency Response20Hz - 20kHz
Load Impedance1000 ohms
Phantom Power Requirement48V
ConnectorXLR
Sensitivity-37dB±2dB (0dB=1V/Pa at 1kHz)

Related product manuals