ICP OCF105A12C User Manual

2008/12/02 X40084 Rev. K
Caution: Do not tamper with the
unit or its controls.
Call a qualified service technician.
INSTALLER / SERVICE TECHNICIAN:
USE THE INFORMATION IN THIS MANUAL FOR THE
INSTALLATION / SERVICING OF THE UNIT AND KEEP
THE DOCUMENT NEAR THE FURNACE FOR FUTURE
REFERENCE.
HOMEOWNER:
PLEASE KEEP THIS MANUAL NEAR THE FURNACE
FOR FUTURE REFERENCE.
Printed in Canada
Printed on 100% recycled paper
OIL FIRED FURNACE
DOWNFLOW or HORIZONTAL
Model:
OCF105A12C
D
N
S
-
0
58
8
R
ev
.
B
Manufactured by:
UTC Canada Corporation
ICP DIVISION
3400 Industrial Boulevard
Sherbrooke, Quebec - Canada
J1L 1V8
445 01 4024 05

ICP OCF105A12C Specifications

General

Brand	ICP
Model	OCF105A12C
Category	Furnace
Language	English

Summary

Furnace Installation Safety

Safety Labels and Requirements

Explains safety terms, warning definitions, and critical installation requirements.

Safe Installation Requirements

Details critical safety requirements for proper furnace installation.

Venting Procedures

Venting System Overview

Side-Wall Venting

DV-2000™™ Side-Wall Venting System

Details on the DV-2000™™ system for side-wall venting.

DV-2000™™ Venting System Connections

DV-2000™™ Venting System Connections

Step-by-step connection guides for furnace breach and vent terminal.

Combustion Air Requirements

Combustion Air for DV-2000™™ System

Installing the wall terminal and connecting combustion air piping for DV-2000™™.

General Combustion Air Needs

Fuel System and Burner Installation

Burner Installation and Setup

Steps for mounting the burner, making connections, and initial checks.

Blocked Vent Shut-Off (BVSO) System

Furnace Operation

Sequence of Operation

Details startup sequences for different burner and venting configurations.

Operation Details and Checks

Sequence of Operation Details

Describes normal and abnormal operation sequences for various systems.

Initial Checks and Adjustments

Furnace Testing and Calibration

Furnace Testing and Calibration

Procedures for curing combustion chamber, airflow, vent temp, pressure, and safety tests.

Furnace Maintenance

General Maintenance and Safety

Heat Exchanger and Firepot Service

Firepot Replacement and Flooding

Technical Specifications

Technical Specifications