ICP OLR Series - Page 10

CORRECT BAND
OVERLAP
SEALANT FLOWING
OUT FROM UNDER
BAND CLAMP AT
BREECH
TWIST SPIN SLEEVE TIGHTLY INTO
BREECH COLLAR
SEALANT OUTFLOW
11
FIGURE # 1.9 FIGURE # 1.10
FIGURE # 1.7 FIGURE # 1.8
SEALANT FLOWING OUT FROM UNDER BOND CLAMP AT
TERMINAL
SEALANT OUT FLOW
FIGURE # 1.11
APPLY THE SEALANT
TO THE TUBE END