Why is the chain tensioner breaking on my ICS 680GC Chainsaw?
If the chain tensioner on your ICS Chainsaw is breaking, it could be because the side cover nuts are not tight enough. Torque them to 20 ft-lbs (27 Nm).
Explains WARNING, CAUTION, and IMPORTANT symbols indicating potential hazards.
Icons for reading manual, wearing PPE (helmet, ear protection, glasses), and hand protection.
Critical items to minimize chain breakage, including guards and chain condition.
Guidelines on protective clothing, footing, environment, and electrical safety.
Critical information on the correct gasoline/oil mixture and oil types.
Crucial steps for setting and checking correct chain tension, and indicators of incorrect tension.
Essential precautions and guidelines for safely handling fuel.
Instructions for correct fuel mixture ratios and storage recommendations.
Step-by-step guide for starting the saw when the engine is cold.
Essential checks before starting operation, including chain tension and safety gear.
How to start cuts, use the WallWalker, and manage feed force.
To Next Page
General
