ICS SpeedHook 823H - Setup: 813 M & 814 PRO Hydraulic Mounting Bracket Installation

© 2012 ICS, Blount International Inc. Specications are subject to change without notice. REV1112 F/N 70569
TITLE SpeedHook
®
OPERATOR’S MANUAL
8
SET- UP
STEP 1
Remove WallWalker
®
and spring
813M & 814PRO HYDRAULIC MOUNTING BRACKET INSTALLATION
STEP 4
Attach SpeedHook
®
mounting bracket
assembly. Note: Do not over tighten
attachment bolts
STEP 2
Remove spring anchor
STEP 5
Insert axle into mounting bracket as
shown and firmly tighten bolt
STEP 3
Remove mud flap and bracket
STEP 6
Complete assembly