Need help?Do you have a question about the Icy Box IB-M2HSF-703 and is the answer not in the manual?
General| Type | Heatsink/Radiatior |
|---|---|
| Fan diameter | 20 mm |
| Number of speeds | 1 |
| Quantity per pack | 1 pc(s) |
| Suitable location | Solid-state drive |
| Thermal conductivity | 1.5 W/m·K |
| Rotational speed (max) | 10000 RPM |
| Operating temperature (T-T) | -20 - 180 °C |
| Material | Aluminium, Silicone |
| Fan connector | 4-pin |
| Product color | Black, Grey |
| Number of fans | 1 fan(s) |
| Number of fins | 8 |
| Thermal pad included | Yes |
| Voltage | 12 V |
| Harmonized System (HS) code | 84733080 |
Weight and Dimensions| Depth | 24 mm |
|---|---|
| Width | 75 mm |
| Height | 13 mm |
| Weight | 51 g |
| Package depth | 200 mm |
| Package width | 105 mm |
| Package height | 27 mm |
| Package weight | 123 g |
| Fan dimensions (W x D x H) | 20 x 20 x 6 mm |
Explains signal words and safety codes to indicate hazard levels and consequences.
Covers risks of electrical shock and contact with conductive parts.
Potential injuries from sharp components during installation.
Hazards from heat, ventilation, small parts, packaging, and data loss.
Safe cleaning procedures and environmentally responsible disposal.
Lists all items included in the product packaging.
Highlights the main functionalities and specifications of the M.2 cooler.
Unscrewing the counter plate and preparing thermal pads.
Attaching thermal pads, aligning SSD, and fixing with screws.
Inserting the M.2 SSD with heat sink into the motherboard slot.
Plugging the fan connector into the motherboard.
To Next Page
