iDance XD200 - General Operations Guide

GENERAL OPERATIONS
Power Adapter Connecon
Connecng Bluetooth to your Smartphone I Tablet
Power Management Funcon:
Rear of Main Unit
Connect the included adapter to main unit and plug the supplied adapter into standard AC wall
socket. Press the STD BY buon to turn on power. Hold the buon again turn unit to
standby mode.
Unit will automacally go to standby mode aer 15 minutes without sound output or operaon.
To resume operaon, simply press the STD BY buon to turn on unit
Notes:
If the adapter does not fit properly, turn it over and again. Do not force AC plug.
Remove the power adapter when the unit not operaon or unused for long periods of the me.
Press the STD BY buon to turn on, hold the PAIRING buon to connect your external Bluetooth device.
On your smartphone / Tablet, turn on Bluetooth and enable device scanning.
When XD200 is showed on the Bluetooth device list, select it to connect.
When both devices are successfully connected, you are ready to play music wirelessly from your device.
Press the PLAY buon to start music playback.
Press PREV/NEXT of external Bluetooth device to switch between music tracks.
Hold the PAIRING buon to reconnect other Bluetooth device.
E7
AC 100~240V 50/60Hz
STD B Y