Ideal Boilers Classic FF 340 - User Manual

Supplied By www.heating spares.co Tel. 0161 620 6677
users guide
Classic
Your Ideal users guide
FF 330 - 3 100
FF 340 - 360 LF
ENGINEERED FOR PEACE OF MIND
When replacing a part on this appliance, use only spare parts that you can be assured
conform to the safety and performance specification that we require. Do not use
reconditioned or copy parts that have not been clearly authorised by Ideal Boilers.

Summary

Introduction

Gas Safety Regulations

Electricity Supply Requirements

Important Operational Notes

Operational Precautions Summary

Safety and operational guidelines including casing, ventilation, faults, and flammable materials.

Minimum Installation Clearances

Clearance Above Boiler

100 mm (4") clearance required above the boiler.

Clearance Sides

5 mm (1/4") clearance required at each side of the boiler.

Clearance Below Boiler

100 mm (4") clearance required underneath the boiler.

Clearance Front

75 mm (3") clearance required in front of the boiler for servicing.

Boiler Lighting Procedure

Control of Water Temperature

Boiler Shutdown

Short Periods Shutdown

Turn boiler ON/OFF switch to OFF for short periods.

Boiler Controls Overview

Boiler Relighting

Frost Protection

Boiler Overheat Thermostat

System Water Pressure

Escape of Gas Procedure

Cleaning Instructions

Maintenance Schedule

Ideal Boilers Classic FF 340 Specifications

General

Brand	Ideal Boilers
Model	Classic FF 340
Category	Boiler
Language	English