USB
Power
When complete, it will show this message:
• Press the power button to restart the
handset and complete the update procedure.
After a few seconds LEDs at the top of the
display (Partner & Hazard) will flash Green /
Red indicating update is continuing and the
following screen will be shown (right)
• Press and hold the power button for 15
seconds
• Release the power button to shut
down the handset
• Remove the flash drive
• This will take several minutes, after which the
update is complete and the main handset is
ready for use
4
www.idealnetworks.net 163818. Rev 1.
To Next Page
Loading...
