Need help?Do you have a question about the IDEAL Networks NaviTEK NT Pro and is the answer not in the manual?
Prohibits connecting telecommunications networks to the tester's ports to prevent damage or shock.
Provides detailed results for DNS, Gateway, Internet Pings, and Trace Route tests.
Lists detected hosts in the network and their MAC/IP addresses.
Explains how the tester detects and displays LLDP, CDP, and EDP messages from network devices.
Configuration of owner details, language, preferences, date/time, and software updates.
Settings for cable type, shield type, and NVP for the Wiremap test.
Configuration for DNS, Gateway, and Target settings for the NET TEST.
Details on selecting report styles, including summary, brief, and full reports.
Overview of the 4-page brief report structure and initial summary of tests.
Details specific test results for Wiremap and NET TEST, including pass/fail status.
Procedure for generating and saving reports to a USB key in various formats.
Enabling Wi-Fi on the NaviTEK NT for wireless transfer of test results.
Steps to download results to an Android device using the IDEAL AnyWARE app.
Configuration for Wiremap tests, including cable type, shield, NVP, and termination.
Tests for open circuits, shorts, and length measurements on un-terminated cables.
Tests for faults, voltage warnings, and length with active remote termination.
Configuration for IPv4 and IPv6 addressing, including DHCP and static settings.
Prohibits connecting telecommunications networks to the tester's ports to prevent damage or shock.
Provides detailed results for DNS, Gateway, Internet Pings, and Trace Route tests.
Lists detected hosts in the network and their MAC/IP addresses.
Explains how the tester detects and displays LLDP, CDP, and EDP messages from network devices.
Configuration of owner details, language, preferences, date/time, and software updates.
Settings for cable type, shield type, and NVP for the Wiremap test.
Configuration for DNS, Gateway, and Target settings for the NET TEST.
Details on selecting report styles, including summary, brief, and full reports.
Overview of the 4-page brief report structure and initial summary of tests.
Details specific test results for Wiremap and NET TEST, including pass/fail status.
Procedure for generating and saving reports to a USB key in various formats.
Enabling Wi-Fi on the NaviTEK NT for wireless transfer of test results.
Steps to download results to an Android device using the IDEAL AnyWARE app.
Configuration for Wiremap tests, including cable type, shield, NVP, and termination.
Tests for open circuits, shorts, and length measurements on un-terminated cables.
Tests for faults, voltage warnings, and length with active remote termination.
Configuration for IPv4 and IPv6 addressing, including DHCP and static settings.
General| Cable Testing | Yes |
|---|---|
| Connectivity | RJ45, USB |
| PoE/PoE+ Testing | Yes |
| Wiremap | Yes |
| Ping | Yes |
| Traceroute | Yes |
| Link Layer Discovery Protocol (LLDP) | Yes |
| CDP/EDP | Yes |
| VLAN Support | Yes |
| DHCP Client | Yes |
| Network Discovery | Yes |
| Autotest | Yes |
| Fiber Optic Testing | No |
| Network Types | Ethernet, Gigabit Ethernet |
| Test Types | Network |
| Operating Temperature | 0°C to 45°C |
To Next Page
