IDEAL Networks NaviTEK NT Pro - HOME Screen: Live Fiber Network; Fiber Network Connection and Optical Power

NaviTEK NT 151844 Iss 4
User Guide Page 11
HOME Screen (with live fiber network connected - Pro only)
When the Pro tester is connected to a live 1Gb/s fiber network, Autotest automatically detects
the partner Ethernet device at the far end of the fiber. (There is no need to select copper or
fiber mode manually.) With the exception of power, the tests and information shown on the
HOME screen are as for copper.
IP details screen
In the HOME screen, select the IP icon then press ENTER to display the IP screen.
This screen shows detail of the IP status and address of the tester and the IP addresses of the
network elements that are tested by the NET TEST.
Received Optical Power
Select then press ENTER to
display the Optical screen
which gives details about the
SFP fitted and the transmitted
and received optical power
Fiber network connection
Info
Indicates whether an IP address
has been assigned to the
tester, by DHCP or statically
IP Address
Tester IP address
Network IP addresses
IP addresses of the various
network elements