IDEAL Networks NaviTEK NT Pro - HOME Screen Functions; Memory and Status Indications

NaviTEK NT 151844 Iss 4
User Guide Page 7
HOME Screen
• The HOME screen is displayed following start-up.
• To refresh the HOME screen and update the display of the current connection status,
press Autotest.
• To display more information about an item on the HOME screen, use the Cursor
buttons to move the orange highlight to the required item on the screen, then press
ENTER.
• To return to the HOME screen from any other screen, press Escape repeatedly until the
HOME screen appears.
Memory Status
Shows the number of
results stored / total
capacity
Current time
Tester Icon
JOBS / SETUP
Press F1 (JOBS) to access
the JOBS menu
or following F3 (MORE)
press F1 (SETUP) to access
the SETUP menu (see
Menu Maps)
Auto Save Selection
Highlight the icon using the
cursor buttons and press
ENTER to select how results
should be saved
MORE
Press F3 (MORE) to
access the SETUP
menu using F1 (SETUP),
or to control the tone
generator using F2
(TONE) when a cable is
connected
Job Selection
Shows the currently
selected Job. Highlight the
icon using the cursor
buttons and press ENTER
to select which Job to save
results to
Status Indications:
Battery full
Battery
2
/
3
full
Battery
1
/
3
full
Battery empty
Mains / on charge
Wi-Fi hot spot enabled
Notifications Area
Shows the current activity or
status of the tester
NAME
Press F2 (NAME) to edit the
name format of the next and
subsequent test results to
be saved