IDEAL Networks NaviTEK NT Pro - Network Statistics and VLAN Scan; Traffic Utilization Graph; VLAN Detection and Configuration

NaviTEK NT 151844 Iss 4
User Guide Page 13
Statistics, VLAN scan, Port, Errors and 802.1x status
When an Ethernet link is established, select the Port Rate / Duplex field in the HOME screen
and press ENTER to display detailed information about the connection and the network.
Traffic graph
Shows the percentage of the
port rate utilised over time.
Connect the tester to a mirror
port or test port on the switch
to monitor traffic in a
particular network span
MORE
Press F1
(MORE) to
display the
next screen
SCALE
Press F2 (SCALE) to
adjust the time scale
MORE
Press F1
(MORE) to
display the
next screen
VLANs
Lists the VLANs with
ID detected in the
network traffic
VLAN ID
The current VLAN
setting of the tester
Change VLAN
Select a VLAN from the list of
network VLANs detected. Press
ENTER to set the chosen VLAN as
the current tester VLAN setting,
then press F2 (APPLY)
Bandwidth
Shows the peak
traffic bandwidth