IDEAL Networks SecuriTEST IP - Connecting Cameras; Physical Connection Options; Camera Powering Methods; Integrated Power Outputs

Physically Connect Camera
Connect to any IP or analog camera using RJ-45,
BNC connections or Wi-Fi via network.
Wi-Fi Camera Analog Camera
IP Camera
Power Camera
Whether you are installing or troubleshooting cameras, SecuriTEST IP
supports all your power requirements for IP and analog cameras.
No need for separate power injectors – SecuriTEST IP
includes the following power outputs:
Power the camera using Power over
Ethernet (PoE+), up to 24 watts from the
tester - RJ-45 port.
Power the camera using 12V DC from
the tester - 2.5mm to 3.5mm barrel
connector.
Power the camera by passing PoE+
from the network and through the
tester - RJ-45 port.
3
Proof of Performance