IDEAL Networks SecuriTEST IP - IP Camera Management; Identification and Configuration; Analogue & HD Camera Configuration; Setup and Testing

Camera Identification and Login
QuickIP™ automates the process of connecting to
IP cameras, allowing novice technicians to configure
IP cameras as easily as analog cameras. For instances
where dynamic IP addresses are required by the camera,
SecuriTEST IP has a built-in DHCP server making setup
easy and eliminating the need for additional network
hardware.
A suite of networking troubleshooting tools are available
to pinpoint and solve network connectivity issues.
• Display Network Configuration
• Ping / TraceRoute
• Hub blink for Port Identification
• IP network Scan - check for IP address conflicts
IP Camera Setup
SecuriTEST IP oers a comprehensive range of ONVIF and non-ONVIF
camera setup tools to ensure the camera is installed correctly
Analog and HD Camera Setup
Easily setup analog cameras.
1. Configure camera – update camera information and
network settings.
2. Aim and focus - use the high-resolution touchscreen or
the hard keys when wearing gloves.
3. Program presets for PTZ cameras – Program PTZ
camera presets for users to automatically look at
predefined areas.
4. Take snapshot – save video snapshots including preset
locations for your installation reports.
5. Record video clip – record video clips to demonstrate
complete coverage for PTZ cameras.
Video adjustment PTZ protocol settings Test pattern generator to adjust screens
4
www.idealnetworks.net