SecuriTEST IP
SecuriTEST IP is an installation and troubleshooting tester
for digital/IP, HD coax and analogue CCTV camera systems.
With a single tester that can power, configure and document,
SecuriTEST IP increases productivity from start to finish.
Supply power to cameras via PoE/PoE+ (Power over
Ethernet) or standard 12V DC power using its internal Li-Ion
battery, eliminating the need for external power adapters
and injectors.
The QuickIP™ feature allows installers who are new to IP
camera systems to quickly and easily connect to cameras
without being network experts.
Create professional test reports including video screen
shots to verify the job has been completed successfully and
reduce unpaid call backs.
CCTV Camera Tester for
IP Digital / HD Coax /
Analogue Systems
Camera Configuration, Installation and Troubleshooting
Physically connect
camera
Connect camera to the
tester using ports:
RJ45, BNC or Wi-Fi.
Send reports
Send reports from the jobsite
using email or preferred file
sharing website.
Power camera
Power the camera using:
PoE (tester battery or network
pass through), DC 12V/2A
(tester battery).
Document
Create reports with video
images, statistics and camera
settings.
Camera Identification
and Login
Automatic network
configuration and connection
to IP cameras.
Camera setup
Comprehensive setup options
including aim, focus, PTZ
presets, network settings (IP),
video settings.
SecuriTEST
®
IP
To Next Page
Loading...
