IDEAL Networks SecuriTEST IP - Connecting Cameras; Physical Connection Options; Camera Powering Methods; Integrated Power Outputs

Physically Connect Camera
Connect to any IP or analogue camera using RJ45,
Wi-Fi or BNC ports.
Wi-Fi Camera Analogue Camera
IP Camera
Power Camera
Whether you are installing or troubleshooting cameras, SecuriTEST IP supports
all your power requirements for IP and analogue cameras.
No need for separate power injectors – SecuriTEST IP includes the following power outputs:
Power the camera using Power over
Ethernet (PoE), up to 24 watts from the
tester - RJ45 port.
Power the camera using DC12V/2A from
the tester - 2.5mm to 3.5mm barrel
connector.
Power the camera by passing PoE
from the network and through the
tester - RJ45 port.