SignalTEK NT 156875 Iss 3
User Guide Page 41
Cable Tests
Wiremap
Setup
Cable Type
Cat 3
Cat 5
Cat 5e
Cat 6
Cat 6A
Cat 7 and 7A
Cat 8
USOC 1Pair
USOC 2Pair
USOC 3Pair
USOC 4Pair
ETH 1236
ETH 1278
PROFINET 4W
COAX RGxx
ISDN BRI
DB
Custom
Shield Type
UTP
STP
UTP/STP
Display Preference
None
568A
568B
USOC
TERA
Cable Name
Cable name - Text string
(Store up to 20)
Custom wiremap - Select pins 1 – 8
Use Custom NVP - Yes
- No
Custom NVP(%) - Fixed 72%
- custom 59% - 89%
Split Pair - Enable or disable
Xover Allowed - Enable or disable
Termination Types supported and identified by icon
Active Remote - #1 - #12
Remote Unit
Single-ended Wiremap Tests
Faults - Open circuit by pin
- Short circuit by pin
Length of pair - Meters / Feet (Set in System Setup)
- Range 100m / 390ft
Double-ended WiremapTests
I/D - Active Remote # / Remote icon
Indications on Active Remote - Voltage Warning (>±10v on any pins)
- Pass/Fail
Indications on Remote Unit - See below
To Next Page
Loading...
