IDEAL 4855 - Page 48

- 48 -
IDEAL 4855 • IDEAL 5255 • IDEAL 6655
D
= Greasing points on the machine.
Grease the backgauge (A) control weekly
with a grease gun. Advance the backgauge
as far as possible to the front.
(Use non-resinous oil or grease).
Grease the remaining parts twice a year (see
picture).The main switch must be on "0" (B).
Remove lower panel (C).
Tools in tool set or tool holder.
• Remove any paper.
• Grease the machine.
• Check the 4 joining bolts and 2 pushing
bars for wear (D). If necessary inform your
service personnel.
• Mount the machine.
Danger!
• Maintenance work may only be
performed by trained staff.
• Disconnect the mains before
starting any service work or before
removing the cover.
•
Maintenance and cleaning
• •