Need help?Do you have a question about the IDEAL 61-557 and is the answer not in the manual?
General| Category | Digital Multimeter |
|---|---|
| Model | 61-557 |
| Type | Handheld |
| Display | LCD |
| AC Voltage | Yes |
| DC Voltage | Yes |
| AC Current | Yes |
| DC Current | Yes |
| Resistance | Yes |
| Continuity | Yes |
| Diode Test | Yes |
| Safety Rating | CAT III 600V |
| Temperature Range | -40°C to 1000°C |
| Battery | 9V |
| Current Range AC | 10A |
| Current Range DC | 10A |
| Resistance Range | 40MΩ |
| Display Digits | 6000 |
Contact information and support channels for IDEAL INDUSTRIES, INC. for customer assistance.
Details the purpose and location of each button, terminal, and indicator on the voltage tester.
Explains the meter's indication for high AC/DC voltage measurements, prompting PPE use.
Describes the automatic power-down function to conserve battery life after periods of inactivity.
Details the Low Impedance (LoZ) measurement mode for reducing ghost voltage influences.
Information on activating and using the LCD backlight and built-in flashlight.
Procedure for detecting AC voltage without direct contact using the NCV sensor.
Steps for accurately measuring AC and DC voltages using the meter's probes.
Instructions for testing Ground Fault Circuit Interrupter (GFCI) outlets with the tester.
Method for testing the continuity of electrical circuits using the tester's continuity function.
Electromagnetic compatibility and interference standards the meter complies with.
Compliance information regarding Federal Communications Commission (FCC) regulations.
List of international and national safety standards the meter adheres to.
Procedures for inspecting and maintaining the meter, test leads, and batteries.
Recommendations for proper cleaning, storage, and handling of the tester.
Information regarding user-serviceable parts and service options for the tester.
Specific instructions for the legal and environmentally sound disposal of batteries.
To Next Page
