IDEAL 61-736 - Advanced Measurements; Measuring Resistance (Ohms); Verifying Continuity

Page 7
Verifying Continuity ( ):
• Verify the circuit is de-energized.
• The meter will sense the level of
resistance and beep if the resistance
is less than 25 Ω to confirm that
continuity is present.
Closed
Circuit
Open
Circuit
Measuring Resistance (Ohms):
• Verify the circuit is de-energized to obtain accurate measurements.
ND 4952-1 61-732/736 Instructio 9/2/04 9:41 AM Page 7