+
The clamp moves automatically when cutting
is activated.
The paper can be pressed in advance, with
the foot pedal.
Cutting is activated by pressing both actuators
(B) on the front table.
Cutting activation:
Press both actuators of the two-handed
control system (A) simultaneously and keep
them pressed until the paper is completely
cut. The safety area (B) must be free.
To interrupt or stop cutting:
To interrupt or stop cutting, release
both actuators (A) of the two-hand control.
•
Operation •
Symbols for cutting activation:
Cutting sequence with automatic clamping.
To Next Page
Loading...
